Capsule/Tablet Pill Counting Machine

Introduction:

This machine is mainly used for quantitative sub-loaded capsules for pharmaceutical, research units, laboratories, small and medium volume production. The machine uses electromagnet vibration effects, stable, and reliable; Design Science, simple, easy to use, small size and light weight.

How to Operate:  

1. Then a good power supply, so that the number of tablets of disc counter-clockwise rotation.
2. Into an appropriate capsule, open the power supply, will be transferred to a suitable voltage switch position, so that electromagnetic vibration to reach the right intensity, so that the number of tablets capsules disk hole easy access to a few tablets, while dynamic capsule with a brush, so that the number of tablets of hole both capsules.
3. Bottling, it will bottle feed into the capsule out of the mouth or the mouth of the bottle with your fingers gently touch the micro-switch, the number of tablets of disc rotation to all fall into the capsule under the feed mouth, and then immediately release micro-switch.
4. into the next count work, using brush dynamic capsule

Notes:

1. The number of tablets of the height of the disk should be the head capsule length of the same or slightly higher than the number of tablets of Capsule disk, not too low or too high, otherwise turn will ruin capsule is too low can be higher than the pad with the Calibrating the middle part and to the middle hole ended up with the shaft after the match abandoned DVD films, is too high please lathe to a few tablets of the bottom plate washer (do not be confused too low).
2. Collar disk on the number of particles must be adjusted to the appropriate height, and bottom should be the head capsule to maintain a distance of about 1.5-2MM, too low, hampering the capsules will be too high.
3. The number of tablets not all covered with holes in the capsule not to be pressed micro-switch, otherwise the position will go to Circlip broke capsule. Counting all the holes in the capsule is not available when covered with a brush dynamic capsule, so that the number of tablets is capsule hole.
4. Damp after the deformation of the capsule can not count on the machine.
5. The number of tablets not pressure plate, or not working properly; lift the machinery can not be carried in a few tablets of the plate, otherwise it would loose a few tablets of disc damage.
6. Capsule to be locked together completely, the length of a unified, without fail capsules.

Technical parameters: